Restoration Process

Remove Rear Axel
Sand Blast Frame (11/08/2002)
Replace Right Out-Riggers
Replace Right Foot Well
Replace Right Sills
Replace Right Rear Wheel Arch
Replace Rear Inner Fender
Straighten Frame (1/18/2003)
Fit Doors and Wings
Weld In Left B-Post
Sandblast Rear end
Paint Rear End
Weld Up the trunk (I mean Boot)
Repair left inner wheel well
Left Side Inner fender and B-Post
Engine Machining at ABT
Left Side Foot Well
Repair rear cockpit panel
Repair front Cross member
Fix cubby box in trunk (7/20/2003)
Tidy up frame in a bunch of spots
ReBlast Frame 
Epoxy Prime & Seal Frame
Seam seal
Light sanding
Color Coat/Clear Coat frame
Install Wire Harness
Install Brake Lines
Install rear end
Install Emergency brake(11/15/03)
Install rear shackles (12/01/03)
Blast front suspension parts
Install front suspension
Refurbish Overdrive
Inspect Transmission
Get back engine From ABT
Install Engine and drive train
Blast and paint Muffler
Install Gas Tanks and fuel pump
Install Fuel lines and Battery cables
Install carburetor and ignition system
Install Muffler
START ENGINE - (3/1/2004)
Install Dashboard (6/18/2004)
Restore Windshield wiper motor
Chrome Parts
Upholstery
Windscreen Install
Work On Sheet Metal
Body Work (June-July 2005) 
Paint Body (July 9, 2005)
Carpet and Armacord (July 2005)
Bumpers 
Weather Stripping (Aug 2005)

Steve At 
American Stripping Blasting
the Frame 12/04/02
-
Photo courtesy of 
Jeff Hardin (P.O.)